由生物相容性聚二甲基硅氧烷 (PDMS)制成,具有透气性,可确保 CO2 和 O2 交换。
薄玻璃中的支撑物是显微镜载玻片,具有出色的光学特性,例如高透明度和低自发荧光。这允许使用光学、荧光和共聚焦显微镜以时间和空间分辨率直接观察您的生物样本。
的这个包3 IC-芯片 来无菌培养皿中并封闭。芯片必须储存在干燥条件下,不能直接暴露在阳光下,并在室温 (15-25 °C) 下储存。
侧通道 | corridor | |
Height | 150μm | 150μm |
Width | 3250 微米 | 1125 µm (narrow portion) 3375 µm (wide portion) |
体积(建议注射) | 20μl | 20μl |
入口直径 | 1000μm | 1000μm |
IC-Chip 表面没有涂层。根据您的应用并最终改善细胞粘附,您可以使用聚合物和/或蛋白质溶液涂覆通道表面。
This microfluidic device can also be used with cells embedded in hydrogels (e.g., collagen I, collagen IV, fibronectin, matrix gel, etc.) to re-establish a reliable biological microenvironment.
The 1 mm inlet diameter allows for easy injection of cell suspensions through a common pipette. 20 µL is the recommended volume per channel/chamber; this will allow for a few extra µL during the actual injection and complete fill.
此外,还可以使用直接安装在入口中的 1/16″ 管子在动态流动条件下进行研究
DingXu (Suzhou) Microfluidics Technology Co., Ltd. is a high-tech enterprise dedicated to the field of microfluidics. We are committed to providing customers with comprehensive microfluidic solutions, including customized microfluidic chip development, surface modification, microfluidic chip processing equipment, and microfluidic instruments. Our team boasts extensive experience and technical expertise, continuously combining professional knowledge with innovative thinking to deliver high-quality solutions. We consistently prioritize customer-centric values, embrace self-challenges, and pursue excellence. Through professionalism, innovation, and collaboration, we aim to create greater value for our customers and contribute to a brighter future in the field of microfluidics.
© 2024. All Rights Reserved. 苏ICP备2022036544号-1